Preferences
Artemide
1481 results
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: Gople
Brand: Artemide
Specifications:
The basic form of the Gople Lamp enhances the beauty of glass, hand-processed according to an ancient Venetian technique that gradually turns white glass into crystal glass by combining both upon blowing, thus making each piece unique. More innovative finishes are added, including silver or copper vacuum metallization.Silver, bronze, copper and blue finishes are made with an innovative and sustainable metal vacuum deposition process.
From the point of view of environmental-friendliness, “sputtering” is the absolutely cleanest coating technology for the type of metal used and because all emissions are abated, in particular those into the atmosphere of sulphuric acid and cyanides produced by galvanic processes.
Solid paint with up to 5% of solvents (compared to 75% of traditional products) is employed for the successive protective clearcoat phase.
The process generates very little waste and the resulting finish is particularly resistant over time. In any of these cases, glass finishing is designed to ensure the best relation with the emitted light, screening the source and maximizing direct emission through transparency. The most basic version with the traditional E27 or E14 joint is designed to provide different performance levels compared to the more innovative RWB version, where colours can be combined with each other to create lightscapes that meet space requirements. It is a timeless solution for its flexibility in adjusting to the development of standard source technologies.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 39
Brand: Artemide
Specifications:
A.39 Refractive's patented optical technology was developed to achieve maximum efficiency on a small scale, in compliance with the regulation for the lighting of workspaces.The lens is specially designed to intercept 100% of the flux emitted by the LED and control it with minimum dispersion so as to ensure more than 90% efficiency.
The lens is the primary optical system that collects and redirects the flux without intercepting the geometry of the cell in which it is inserted, thus avoiding a deterioration in performance in terms of quantity and quality of light emission.
The small cell in which the LED and lens are inserted acts only as screen to avoid direct viewing of the LED from certain angles but does not affect the flux emitted, leaving a clean, pure light, whose characteristics are defined solely by the primary optics.
Collection: A 24
Brand: Artemide
Specifications:
A.24 is a new comprehensive and flexible system to design light in space. A single profile, only 24 mm thick, can be installed in the recessed, ceiling or suspension mode to continuously follow the angles on a flat or three-dimensional surface. This profile hosts to a variety of performance options: diffused light, sharp optical units with three beam angles, or a smart magnetic track. This makes A.24 a flexible system, as well as an open platform to accommodate other products from the Architectural collection. The suspension version also features direct emission. The three solutions can be alternated to match the architecture and the room functions with utmost flexibility. The competence of Artemide is revealed by the quality of light, as well as by the ability of A.24 to freely move in space, with direct power connection points up to 14 metres apart.
Collection: A 24
Brand: Artemide
Specifications:
A.24 is a new comprehensive and flexible system to design light in space. A single profile, only 24 mm thick, can be installed in the recessed, ceiling or suspension mode to continuously follow the angles on a flat or three-dimensional surface. This profile hosts to a variety of performance options: diffused light, sharp optical units with three beam angles, or a smart magnetic track. This makes A.24 a flexible system, as well as an open platform to accommodate other products from the Architectural collection. The suspension version also features direct emission. The three solutions can be alternated to match the architecture and the room functions with utmost flexibility. The competence of Artemide is revealed by the quality of light, as well as by the ability of A.24 to freely move in space, with direct power connection points up to 14 metres apart.
Collection: Nur
Brand: Artemide
Specifications:
An extreme geometric synthesis of optics par excellence, Nur manifests its presence through a monolithic and mono-material body. The essential and geometrically calibrated lines of a perfect parabola conceal an optical heart that perfectly controls the emission, without offending direct vision. It ensures general ambient lighting thanks also to indirect emission. Artemide App Compatible.
Collection: Orsa
Brand: Artemide
Specifications:
Orsa is an embodiment of precision – an elegant pendant light pared down to its essential elements, allowing the light to express a larger volume. A slim metal stem flares out at one end to form the heat-sink and housing for the LED, with a UV bonded methacrylate cover containing the light source. The design of the methacrylate cover ensures that the light source remains invisible, giving it an appearance of a floating disk of light. The industrial design team at Foster + Partners experimented with various materials, surfaces and optics to achieve the desired lighting effect and volume. An elegant, minimalist object, Orsa is designed as a single piece or as a part of a larger ensemble.
Collection: Pirce
Brand: Artemide
Specifications:
Pirce’s award-winning design is one of Artemide’s top sellers. Originally released in halogen, its light source has been reimagined to incorporate a high quality, energy-efficient LED light source.
Pirce is not only an elegant light source, it is an alluring decoration with a strong sense of presence turned on or off. Its slim disc merges softly into flowing twirls that spiral downwards to create alluring lighting effects.
Collection: Pirce
Brand: Artemide
Specifications:
Pirce’s award-winning design is one of Artemide’s top sellers. Originally released in halogen, its light source has been reimagined to incorporate a high quality, energy-efficient LED light source.
Pirce is not only an elegant light source, it is an alluring decoration with a strong sense of presence turned on or off. Its slim disc merges softly into flowing twirls that spiral downwards to create alluring lighting effects.
Collection: Pirce
Brand: Artemide
Specifications:
Pirce’s award-winning design is one of Artemide’s top sellers. Originally released in halogen, its light source has been reimagined to incorporate a high quality, energy-efficient LED light source.
Pirce is not only an elegant light source, it is an alluring decoration with a strong sense of presence turned on or off. Its slim disc merges softly into flowing twirls that spiral downwards to create alluring lighting effects.
Collection: Ripple
Brand: Artemide
Specifications:
This suspension system shapes the qualities of space through molecular growth, combining light and sound absorption.
Comprised of circular structures in three different diameters, it works through layers of performance that can be modulated as required.
The structures unveil "pure" light or can be enriched by a diffuser which, in addition to interacting with the light, offers sound absorption properties.
The basic element of the product is a circular ring whose profile is a synthesis of optics and mechanical engineering.
Ripple elements can also be combined in increasingly complex customised solutions: from simple lines or geometries of elements with a constant diameter, to compositions that combine different diameters in a more organic and free growth, through to show-stopping, striking solutions.
Once again, Artemide's project with BIG is guided by a strong idea of interaction with spaces, an open, modular and scalable solution that combines technological innovation with compositional intelligence, translating all this into something apparently simple but striking and full of potential.
This freedom of configuration is then mirrored by the flexibility in management granted by interaction with Artemide App.
Collection: Ripple
Brand: Artemide
Specifications:
This suspension system shapes the qualities of space through molecular growth, combining light and sound absorption.
Comprised of circular structures in three different diameters, it works through layers of performance that can be modulated as required.
The structures unveil "pure" light or can be enriched by a diffuser which, in addition to interacting with the light, offers sound absorption properties.
The basic element of the product is a circular ring whose profile is a synthesis of optics and mechanical engineering.
Ripple elements can also be combined in increasingly complex customised solutions: from simple lines or geometries of elements with a constant diameter, to compositions that combine different diameters in a more organic and free growth, through to show-stopping, striking solutions.
Once again, Artemide's project with BIG is guided by a strong idea of interaction with spaces, an open, modular and scalable solution that combines technological innovation with compositional intelligence, translating all this into something apparently simple but striking and full of potential.
This freedom of configuration is then mirrored by the flexibility in management granted by interaction with Artemide App.
Collection: Stablight
Brand: Artemide
Specifications:
The Stab light are produced with very traditional bohemian handblowing technology. Its handblowing to wooden moulds.The moulds are produced by hand as well, from hard and wet wood.The glass masters are using glass blowing pipe as basic instrument, gathering several layers of glass in variouse colors and by mouth blowing and shaping with hand tools prepares shape which is very close to the moulds shape.In final stage the glass masters puts the pre-shaped hot glass into the mould and finish the piece to the final shape, which is given by exact form of the mould.After the “hotshop” production phase the vases are finished on cutting shop, where additional parts are cutted out and surface is polished to high gloss.This production process stays on extraordinary skills of glass masters, who are passing their experience from generation to generation.
Collection: Takku
Brand: Artemide
Specifications:
Takku is a completely transversal portable light providing perfect illumination for the office. It can freely accompany us not only in the workplace but also in our personal and living spaces.
The head controls the diffused emission with the optical element on its lower surface.
The emission can be adjusted to 3 different brightness settings to support multiple activities and create different ambiances.
32 hours of freedom from the main electricity supply make it an ideal solution for the flexible interpretation of personal light in private and public places.
Collection: Ilio
Brand: Artemide
Specifications:
With simple geometry, stripped of all formal digressions and reduced to its basics, Ilio draws attention through saturated colour, available in 7 variations. A mono-material aluminium cylinder supports a 39W LED optical engine on the top, which produces high-efficiency diffused indirect light emissions. With a flow of more than 2700 lumen and an 80% yield, it ensures the general lighting of a room. With light regulator configured to controlled socket, dimmer microswitch.
Reviews
Google Rating
Based on 55 reviews
a month ago
unfortunately, you have to be very careful with this e-shop. they don't respect the customer's purchase withdrawal right in accordance with the applicable EU regulations. Follow-up: following the refusal of my return, I have filed appropriate claims with the Lithuanian Consumer Rights Protection Authority as well as ECC-Net (the EU authority)
a month ago
Quick, efficient, pleasant, and pleasant. Complete professionalism! Fast order fulfillment. I recommend.
a year ago
I came across to LineaSelect by mistake and one day I sent them an email to see if they can help me with Devon&Devon bathroom items.
The staff was friendly and our communication easy, with both Aiste and Jaunius, very professional.
Today I received the items and I must say I am impressed. They are exactly as described on the website.
I will return for more items in future for sure and I do recommend this website if you wish to get high quality items for your project. ! 👍
11 months ago
I’m very satisfied with my order from Lineaselect. Fast international delivery to Poland, great communication, and polite, professional managers. The tiles arrived in perfect condition.
Highly recommended!
3 months ago
Delivery of tiles to Luxembourg. Good price. Delivery within 15 calendar days. Good communication, good delivery.