Voorkeuren
Roberto Lazzeroni van Poltrona Frau
67 resultaten
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The supporting structure of the Bolero tables is made from solid wood with triangular cross-section. The wood can be ash, with wenge or moka stain, or Canaletto walnut. The top is available in wood or marble. The wood version comes with veneer in wenge- or moka-stained cut ash wood or Canaletto walnut with its distinctive inlay consisting of a criss-cross grain pattern, always matching the legs. The edges are decorated with a solid wood trim. The 220x110 cm and 250x100 cm versions of the Bolero tables and the round version with 150 cm diameter are also available with the top in Calacatta gold marble or Emperador marble, with bevelled edge and semi-polished or polished polyester finish. The 180 cm diameter round version is also available with a Lazy Susan which, resting on the table top rather than fixed to it, is composed of two round flat surfaces of different diameters.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The design of the Martha armchair is based on the encounter of the two main elements of the frame, both in moulded rigid polyurethane. The seat and armrests form part of a single sinuous open profile, the two extremities projecting outwards. The curved and slightly padded backrest appears to float in the air but is actually fixed to the frame with a hidden system. The entire product is supported by a triangular-section wooden easel structure. The seat’s slight incline towards the back ensures optimal comfort and emphasises the armchair’s dynamic design. The four-legged base is made from solid ash available in the Wengé and Moka finishes.
The colour effects and material combinations emphasize the fluidity and lightness of Martha. The outside of the frame is upholstered with a rich shell of Saddle Extra Leather while the inside can be covered in Pelle Frau® leather or fabric. The combination of the two materials is emphasised by the elegant visible-contrast hand-stitching. A soft seat cushion with removable cover in Pelle Frau® leather or fabric completes the product.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The backrest shell is formed from moulded polyurethane foam with light padding in polyurethane foam and polyester wadding. The seasoned beechwood seat is padded with polyurethane foam and pressed felt and has a spring system consisting of elastic belts. The seat cushions are in goose down with polyurethane foam stabilising insert to reduce the sinking effect without compromising on comfort. The four feet are made from solid ash in a wenge stain or moka ash. The external shell of the Nivola sofa and armchair is upholstered in saddle-leather or Pelle Frau® leather while the inside is covered in Pelle Frau® leather or fabric, enriched with fine visible contrast stitching.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The structure of the Fidelio side tables is made from triangular profile solid ash wood in a moka or wenge stain. The top surface of the table top, in the rectangular and round variants, is upholstered in Cuoio Saddle Extra leather while the underneath is in Pelle Frau® leather. Edge stitching, tone on tone or contrast as desired, embellishes the surface of the saddle-leather top. Alternatively, the tops can come in Emperador marble with a glossy finish or Calacatta gold marble with a glossy or semi-glossy finish. Fidelio’s metal details are in brushed steel with galvanic treatment and a natural brass finish.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The Fidelio floor lamp is a simple rectangle carved from solid ash in a moka or wenge stain, with triangular profile. The light point finds its natural location in this geometric structure with double-layer shade with canvas forming the external layer and PVC the inside layer. The metal details are in brushed steel with galvanic treatment and a natural brass finish.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The legs of the Nabucco table are in wenge- or moka-stained solid ash wood.The top is available in wood or marble. In the wooden version, in wenge- or moka-stained cut ash wood, the edge of the table top is refined with a rounded solid wood trim in the same finish. Rounded edge also for the Calacatta gold marble or Emperador marble version, with glossy or semi-glossy finish.
The Nabucco table comes in three different sizes and in a square version, also with rounded edge.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The structure of the Fidelio side tables is made from triangular profile solid ash wood in a moka or wenge stain. The top surface of the table top, in the rectangular and round variants, is upholstered in Cuoio Saddle Extra leather while the underneath is in Pelle Frau® leather. Edge stitching, tone on tone or contrast as desired, embellishes the surface of the saddle-leather top. Alternatively, the tops can come in Emperador marble with a glossy finish or Calacatta gold marble with a glossy or semi-glossy finish. Fidelio’s metal details are in brushed steel with galvanic treatment and a natural brass finish.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
In the Montera stool the legs are raised and stand out for their cross-like structure and the gunmetal grey metal footrest at the front. The backrest is smaller, maintaining its characteristic curved shape. The same materials and finishes are employed: Pelle Frau® leather and Cuoio Saddle Extra leather, stitched together with raw-edge seam, complement each other perfectly. A version entirely upholstered in Pelle Frau® leather is also available. In this case the stitching has tone-on-tone thread.
The shell of the Montera stools is produced from moulded steam-curved and -pressed beech plywood with padding in polyurethane foam. The base is in wenge- or moka-stained solid ash wood. The stools have plastic caps and a little piece of sheet metal with gunmetal grey finish to protect the top of the footrest. The Montera column stool can be rotated 360° and its height can be adjusted thanks to a gas spring controlled by a chrome steel lever positioned underneath the seat. The base, in chrome steel, is made up of a four-bracket cross plate, a column, a footrest and a round plate. The cross plate, with black nylon spacers, fixes the shell to the base. The tubular footrest has a distinctive knurled finish with diamond motif. The upper part of the column (above the footrest) is upholstered with Cuoio Saddle Extra leather or Pelle Frau® leather to match the upholstery of the shell.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The headboard structure is in solid beech and birch plywood. The two lateral parts are shaped and made from moulded polyurethane foam. The padding is in polyurethane foam and polyester wadding. The Lola Darling bed can be completely upholstered in Pelle Frau® leather or upholstered with a removable fabric cover on the front of the headboard. In both cases a gentle curved effect is created, emphasising the softness of the cover. The cylindrical aluminium feet are either lacquered black or covered with Pelle Frau® leather matching the upholstery of the bed.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The headboard structure of the Suzie Wong bed is in solid beechwood and birch plywood with polyurethane foam padding. Three finishes are available: Suzie Wong, with smooth headboard, Suzie Wong Extra, with smooth headboard decorated with a couple of cylindrical buttons covered in tone-on-tone leather, and Suzie Wong De Luxe, with headboard decorated with geometric motif embroidery. The two moulded lateral parts are made from moulded polyurethane foam. Sides in tulip wood, lightly padded with polyurethane foam. Footboard in poplar plywood with the two corners in moulded polyurethane foam. The upholstery is in Pelle Frau® leather. As well as the tapered feet covered with leather, there is also a variant in solid ash with a moka or wenge stain. The footboard also comes in two versions: high or low, at the same level as the bed frame boards with which it forms a seamless surface.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The Fidelio console table is 75 cm high, 135 cm wide and 45 cm deep. The base, in solid ash with a Moka or Wengé stain, supports the two double uprights with characteristic triangular section. The plates for mounting the tops are made from steel and painted matt black. Spacers in brushed steel with a natural brass finish. Self-adhesive felt pads protect the floor. The top surface is in Emperador or Calacatta Gold marble. Both have a polished finish to which a transparent polyester paint is applied to guarantee greater resistance and prevent the absorption of liquids. The Calacatta gold marble can also come with a semi-polished finish, treated with a water-repellent oil with a highly natural appearance. The marble top is completed with a supporting MDF panel with a non-scratch matt black painted finish, and the underneath is strengthened with a technical mesh to guarantee its resistance. On request, the top can also come in birch plywood upholstered with Saddle Extra leather. In this case the underneath is in matching Pelle Frau® leather.It is particularly advisable to attach the version with marble top to the wall to guarantee greater stability and safety. The rear mounting plate is made of matt black painted steel and permits adjustments to a depth of +/- 6mm.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The base structure consists of an easel made from triangular-section solid ash in a moka or wenge stain which forms three trapezium-shaped supports connected to each other with fine joints created in the wood. The front of the two drawers is in MDF covered in Pelle Frau® leather matching the upholstery of the top, while the internal structure is made from solid ash in a wenge stain. The upholstery of the top, the front of the drawers, the side walls and the doors accessing the rear compartments is in Pelle Frau® ColorSphere.The upholstery of the top is produced using a particular covering technique without any visible stitching.
Behind the two central drawers, the Peek-a-Book desk has two side flaps that conceal a hollow space. The compartments are designed to act as a conduit for cables and can be used to house multi-sockets or electric cables with Schuko or USB.
It is also possible to install a smartphone induction charger under the leather upholstery of the desktop, as suggested by the branded logo.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The comfortable outdoor chair in solid teak wood is designed to complement the outdoor dining table from The Secret Garden collection, design by Roberto Lazzeroni. Generously proportioned and ergonomically designed, featuring armrests and a wrap-around backrest made from a special weave of two-tone cotton webbing in ecru and taupe, which supports the optional outdoor backrest cushion for added support, Ideal for the lunch area of verandas, terraces, patios and open-air spaces, it adds a touch of elegance and personality to the setting. The cushions have removable covers and are designed to allow water to drain away and dry quickly. The armchair completes the Poltrona Frau Boundless Living Outdoor Collections.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The supporting structure of the Fidelio Notte chest of drawers, tall boy and bedside table is in solid Canaletto walnut and birch plywood with Canaletto walnut veneer. The exterior of the drawers and sides are upholstered in Cuoio Saddle or Saddle Extra leather with tone-on-tone or contrast stitching. On request, the back can also be upholstered in saddle-leather as opposed to Canaletto walnut. Even more evocative is the version of the Fidelio Notte with Calacutta gold marble top and semi-polished finish, which joins the version with Canaletto walnut top. The steel feet can be adjusted.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
Every Moondance accessory is upholstered by hand like a unique object. Entirely covered in Pelle Frau® leather and embellished with light padding, pleasant to touch and easy on the eye. The top has the warmth of Canaletto walnut and the natural veins of Calacatta gold marble with semi-polished finish. Each drawer can be arranged and organised according to personal taste, choosing from the refined accessories that complete the Moondance collection. A series of solid wood trays divided into compartments of various sizes and configurations enable you to comfortably store away any kind of item, including ties and belts.
Elegant watch and ring boxes slip perfectly into the drawer compartments and are covered in beige Alcantara®. Inside there is a soft cushion in the same material. Also in beige Alcantara® is the little insert, in two sizes, used to further refine the bottom of the drawer.
The supporting structure of the Moondance complementary furnishings is in poplar plywood with solid Canaletto walnut trim. The back is available in a version with Canaletto walnut veneer or upholstered in Pelle Frau® leather. The structure of the drawers is in MDF with a cut Canaletto walnut veneer and fronts in birch plywood. The Pelle Frau® leather upholstery is padded with polyurethane foam. Steel feet with black plastic protective caps that can be adjusted from the inside.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The legs in solid ash with a moka or wenge stain have the impact of a geometric sculpture. In contrast, the tops are soft and curved, in both the round and rectangular versions. The most distinctive feature of the Othello tables is the wooden structure with triangular cross-section and clean edges, beautifully echoed in the diamond workmanship along the edges of the tops. Poltrona Frau has chosen two different materials for the tops. Smoked glass, semi-transparent and light, exalts the architectural solidity of the legs. Fior di Pesco, a particularly prized variety of marble, grabs the attention with its rich and delicate veins which reveal translucent, almost transparent areas in natural light. Alternatively, there is the equally precious Calacatta gold marble. The glass Othello tables are integrated with visible spacers in brushed stainless steel. In the marble version, with polished or semi-polished finish, the underneath of the top is reinforced with a technical mesh to guarantee its resistance. The top is supported by an HPL laminate substrate.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The supporting structure of the Fidelio Notte chest of drawers, tall boy and bedside table is in solid Canaletto walnut and birch plywood with Canaletto walnut veneer. The exterior of the drawers and sides are upholstered in Cuoio Saddle or Saddle Extra leather with tone-on-tone or contrast stitching.On request, the back can also be upholstered in saddle-leather as opposed to Canaletto walnut. Even more evocative is the version of the Fidelio Notte with Calacutta gold marble top and semi-polished finish, which joins the version with Canaletto walnut top.
The steel feet can be adjusted.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
Every Moondance accessory is upholstered by hand like a unique object. Entirely covered in Pelle Frau® leather and embellished with light padding, pleasant to touch and easy on the eye. The top has the warmth of Canaletto walnut and the natural veins of Calacatta gold marble with semi-polished finish. Each drawer can be arranged and organised according to personal taste, choosing from the refined accessories that complete the Moondance collection. A series of solid wood trays divided into compartments of various sizes and configurations enable you to comfortably store away any kind of item, including ties and belts.
Elegant watch and ring boxes slip perfectly into the drawer compartments and are covered in beige Alcantara®. Inside there is a soft cushion in the same material. Also in beige Alcantara® is the little insert, in two sizes, used to further refine the bottom of the drawer.
The supporting structure of the Moondance complementary furnishings is in poplar plywood with solid Canaletto walnut trim. The back is available in a version with Canaletto walnut veneer or upholstered in Pelle Frau® leather. The structure of the drawers is in MDF with a cut Canaletto walnut veneer and fronts in birch plywood. The Pelle Frau® leather upholstery is padded with polyurethane foam. Steel feet with black plastic protective caps that can be adjusted from the inside.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
There are four metal bases which are available in two finishes, Cemento and Antracite:- base with conical legs
- 5-spoke base with castors, available in both the 360° swivel version with fixed height and version with height-adjustable gas spring. The wheels are soft self-braking swivel castors with black plastic support for the painted versions.
- four-spoke base
- base with column, in both the fixed and swivel versions, with shock absorbing device and automatic return to the starting position.
As well as the four metal bases, Ginger is also available with four triangular-profile solid ash legs, available with moka or wenge-stained finishes, stained according to sample or with RAL lacquer based on a sample.
The shell of the Ginger Ale armchair is made from moulded thermoplastic composite polymer and padded with polyurethane foam. It is available:
- painted in anthracite colour (Antracite)
- painted in cement colour (Cemento)
- entirely upholstered in Pelle Frau® leather
- entirely upholstered in Kvadrat by Poltrona Frau fabric.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
In the Montera stool the legs are raised and stand out for their cross-like structure and the gunmetal grey metal footrest at the front. The backrest is smaller, maintaining its characteristic curved shape. The same materials and finishes are employed: Pelle Frau® leather and Cuoio Saddle Extra leather, stitched together with raw-edge seam, complement each other perfectly. A version entirely upholstered in Pelle Frau® leather is also available. In this case the stitching has tone-on-tone thread.
The shell of the Montera stools is produced from moulded steam-curved and -pressed beech plywood with padding in polyurethane foam. The base is in wenge- or moka-stained solid ash wood. The stools have plastic caps and a little piece of sheet metal with gunmetal grey finish to protect the top of the footrest. The Montera column stool can be rotated 360° and its height can be adjusted thanks to a gas spring controlled by a chrome steel lever positioned underneath the seat. The base, in chrome steel, is made up of a four-bracket cross plate, a column, a footrest and a round plate. The cross plate, with black nylon spacers, fixes the shell to the base. The tubular footrest has a distinctive knurled finish with diamond motif. The upper part of the column (above the footrest) is upholstered with Cuoio Saddle Extra leather or Pelle Frau® leather to match the upholstery of the shell.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The supporting structure of the Bolero tables is made from solid wood with triangular cross-section. The wood can be ash, with wenge or moka stain, or Canaletto walnut. The top is available in wood or marble. The wood version comes with veneer in wenge- or moka-stained cut ash wood or Canaletto walnut with its distinctive inlay consisting of a criss-cross grain pattern, always matching the legs. The edges are decorated with a solid wood trim. The 220x110 cm and 250x100 cm versions of the Bolero tables and the round version with 150 cm diameter are also available with the top in Calacatta gold marble or Emperador marble, with bevelled edge and semi-polished or polished polyester finish. The 180 cm diameter round version is also available with a Lazy Susan which, resting on the table top rather than fixed to it, is composed of two round flat surfaces of different diameters.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
Relaxation and enjoyment in outdoor environments. The armchair is a piece of outdoor furniture in solid teak wood with a natural finish, characterised by impeccable craftsmanship in the woodwork to achieve its embracing and contoured form. Together with the two-seater sofa and the low table height it creates a more informal dining area. The backrest is made up of a special weave of two-tone cotton webbing in ecru and taupe, which supports loose outdoor cushions with removable covers. For more comfortable seating, a square backrest cushion and a rectangular lumbar support cushion are available. All the padding is designed to allow water to drain away and dry quickly. A part of The Secret Garden, the outdoor collection designed by Roberto Lazzeroni, which completes the Poltrona Frau Boundless Living Outdoor Collections.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
An elegant sunbed to furnish the relaxation area of a garden, veranda, private terrace or in the outdoor grounds of spas and wellness centres, as well as by the pool or on a yacht deck, with the craftsmanship of Made in Italy design and the typical style of Mediterranean culture. The sunbed is made of solid teak wood with a natural finish and is characterised by converging geometric contours and the backrest, which can be reclined in three positions, with interwoven two-tone ecru and taupe webbing that supports the cushion. The padding is designed to allow water to drain away and dry quickly. The outdoor sunbed can easily be moved around thanks to the rear one-way wheels. A part of The Secret Garden, the outdoor furnishing collection designed by Roberto Lazzeroni, which completes the Poltrona Frau Boundless Living Outdoor Collections
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The structure of the Fred desk is made from solid ash with a wenge or moka stain and triangular cross-section, which highlights its lightness. Same material and finishes also for the drawer that completes the desk, mounted on metal runners with soft closing mechanism. The surface is covered using a single piece of 4 mm-thick Cuoio Saddle Extra leather without any divisions or stitching. The raw edge seam is finished with protective wax and dye. Metal accessories with gunmetal grey galvanic treatment and protective varnish.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
More a work of art than a design object, the table Infinito∞ cannot be replicated and has been produced in a limited, numbered and signed amount.The offset, double-oval shape in part recalls the complementary shapes of yin and yang, in part an overturned 8, the symbol of endless perfection and prosperity: hence the name. Each foot is carved from a single block of white Carrara marble, milled by a robotic arm of special dimensions and hand-finished, but the result is anything but heavy: the shape of a tree opening outwards with its "branches", expressing lightness and dynamism and further enhancing the table's elegance and strong sculptural value.
The Infinito∞ table is available in two versions: a limited series of only 8 pieces in the large, double-oval shape, 340x120 cm, supported by two legs. Another 64 pieces have instead been made with the oval top, 220x124 cm, with a single base. In the larger version of the Infinito∞ table the top is crossed by a thin stainless steel blade that has been obliquely set in the marble, serving as a trait d'union of the two oval surfaces.
Given the exceptional nature of the material, the series can never be replicated.
A brass plate with Ruthenium finish bearing the Poltrona Frau logo, the designer's signature and the series number of each copy can be found in the centre of the table below the top: from 1 to 8 for the large version and from 1 to 64 for the smaller version.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
The base is made from solid ash in a moka or wenge stain with distinctive triangular cross-section. The top of the Fiorile side tables can be in Pelle Frau® leather, in birch plywood with an inlaid moka- or wenge-stained ash veneer, in Arabescato Venato marble with glossy and semi-glossy finish or in Calacatta marble with glossy and semi-glossy finish.
Collectie: Roberto Lazzeroni
Merk: Poltrona Frau
Specificaties:
In the Diva armchair and chair the seat frame, padded in polyurethane foam and polyester wadding, is in birch plywood. The shell is in moulded rigid polyurethane. The base and legs are in wenge- or moka-stained solid ash wood (special finishes are available on request). Moulded polyurethane foam and polyester wadding also for the padding of the backrest. The sinuous armrests emerge naturally from the shell to create a welcoming seat that is designed to guarantee new sensations of comfort. The Diva is upholstered in Pelle Frau® leather or Poltrona Frau fabrics.
Andere Aanbevolen Collecties
Blijf op de hoogte van projecten en de nieuwste collecties van merken en ontwerpers
